The New Launch X431 V+ ELITE comes with SmartLink VCI. New Launch X431 V+ ELITE is a new generation of 10.1-inch bi-directional Diagnostic Computer. Topological diagnostic interface. Supports new protocols J2534/D-PDU, CANFD/DoIP. Supports FCA (have to register with AutoAuth). Supports 24 volts vehicles (software cost extra).
The product supports the well-rounded diagnosis of all ECUs and show the systems in a topology graph. The VAG guided function of Volkswagen Group can be is also supported for free.
10.1″ Display, 6300mAh Battery, 8mp Camera, Dual WiFi, 4gb RAM 64gb Storage,
37 Reset and special maintenance functions almost meet all the needs of repairs and maintenance in workshops,Oil/ EPB/ SAS/ BMS Reset, ABS Bleeding, Throttle Reset, Injector coding, etc.
Launch X431 V+ ELITE provides various powerful high-end functions:
Online Coding & OE-Level Diagnostic. Online Coding matches/ initializes the newly replaced components to make them work normally, or customizes cars as needed.
FCA SGW Access unlocks FCA vehicles, secure gateway to perform day-to-day service.
VAG Guided Functions: Offer on-screen instructions to complete some complicated functions step by step, such as SAS calibration, ECU coding, etc.
Refresh Hidden Functions: Make full use of the hidden functions, which are not available in the car when it left the factory for different reasons, such as tilting rear-view mirrors, unfolding mirrors, auto park function, etc.
Advanced ECU Coding: Quickly match/code/initialize replaced modules to ensure smooth information communication, activate hidden functions, disable annoying functions, and adjust the vehicle settings.
SmartLink 2.0 VCI compatible with J2534, DoIP, CAN FD, and Heavy-Duty Truck (DC9-36V) protocols, and can diagnose trucks without purchasing the HD Module.
Support X431 TSGUN or Launch X431 i-TPMS (Not only can you use it to activate the sensor’s ID, tire pressure, sensor frequency, tire temperature, and battery status; you can also program sensor data to a blank LAUNCH brand sensor in three ways: Auto, Manual, and Activation Copy; at the same time, you It can be used to write the newly programmed sensor ID to the vehicle ECU.)
Support Launch VSP-600 Video Scope: Check unseen parts and give you a direct image of the engine, gears, compressors, headers and valves, and body components.
Support X431 ADAS Moblie/ ADAS PRO, ADAS Activation Card: Calibrate a wide range of camera-based & radar-based driver assistance systems.
Support BST360 bluetooth battery tester.
IMMO Programming works with X-PROG 3 (sold separately), to perform advanced key programming & IMMO service.
Featuring bi-directional control/ active tests, this Launch scanner can output the commands to ECUs and control/monitor the operation of PDM, SMF, RSM, TCU,
Advanced ECU Coding: Quickly match/code/initialize replaced modules to ensure smooth information communication, activate hidden functions, disable annoying functions, and adjust the vehicle settings. Support Oscilloscope, Sensors, ADAS, TPMS, etc.
VAG guided functions offer on-screen instructions to help you complete some complicated functions step by step.
Auto VIN identifies the test vehicle automatically and allows you to detect the vehicle quickly.
Comes in 1 box, no adapters for old vehicles made before 2002.
2 Year Free Online Updates.
1 Year warranty and after warranty service available.
-7%










Zgemma H11S 4K Single Sat, Free Postage !
€100.00 Original price was: €100.00.€89.99Current price is: €89.99. (ex.vat €73.16)

Otofix - Autel Maxi VCI V200
€139.00 (ex.vat €113.01)
Launch X431 V+ ELITE SmartLink
€1,400.00 Original price was: €1,400.00.€1,300.00Current price is: €1,300.00. (ex.vat €1,056.91)
New Launch X431 V+ Elite comes with SmartLink 2.0 VCI which is compatible with J2534, DoIP, CAN FD, and Heavy-Duty Truck (DC9-36V) protocols (Truck Software NOT included), empowering you to re-flash control modules, replace ECUs, update software, etc. 37 Reset and special maintenance functions almost meet all the needs of repairs and maintenance in workshops,Oil/ EPB/ SAS/ BMS Reset, ABS Bleeding, Throttle Reset, Injector coding, etc.
2 in stock
Categories: Launch (All products), Launch X431 (Professional Tools)
Description
Shipping & Delivery


All orders placed before 3pm will be posted same working day by AnPost.
Delivery normally takes 1-2 working days.
Related products
16pin OBD2 36cm Extension Cable Male/Female
Launch BST 360
Launch CRP 919X DIY Diagnostic Tool
Launch CRP 919X All System Fault Scanner with Reset Functions.
All System Scan Tool Can Read And Clear DTCs, Retrieve Live data of ALL Systems Like:
ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system,
Light system, Wiper System .etc Supports 31 Reset Functions.
This Tool Made For DIY, We NOT Recommend It For Garage As Main Diagnostic Machine, But Is Very Good Tool For That Price Range.
Launch TPMS Sensor
€25.00 (ex.vat €20.33)
Launch X-PROG3
Launch X431 Printer
€120.00 (ex.vat €97.56)
Launch X431 PRO IMMO PLUS Key Programmer and Diagnostic Tool
Launch X431 PRO IMMO PLUS is a new generation of 8-inch special anti-theft matching tool with high configuration and super performance.Comes with X-PROG3 key programmer.
Supports full all system diagnostic, ECU coding, injector coding, actuation, adaptation, active testing and 39 reset and maintenance functions. Comes with 2 years free updates from Launch directly.
2 Year Free Online Updates.
1 Year warranty and after warranty service available.
Price Inc. VAT and Postage (VAT Receipts Available)