Stock located in Dublin. Fast and free delivery across Ireland.

Advanced EV diagnostics, battery-pack testing, full-system scanning, ECU coding and bi-directional control in one professional diagnostic tablet.

The LAUNCH CRP919 EV is a professional diagnostic scanner designed for modern electric vehicles (EVs) and new-energy vehicles. It provides comprehensive vehicle diagnostics, including EV battery-pack diagnostics, full-system scanning, ECU coding and bi-directional/active tests.

With support for modern CAN FD and DoIP communication protocols, the CRP919 EV is designed to work with many newer-generation vehicles and gives workshops, technicians and experienced EV owners access to advanced diagnostic functions.

🔋 EV Battery Diagnostics & Battery Health Reports

One of the key advantages of the CRP919 EV is its dedicated EV battery-pack diagnostic capability.

On supported vehicles and battery systems, the scanner can access battery-related information and perform battery-pack diagnostics. This can help you assess the condition and operation of an EV’s high-voltage battery system.

Battery diagnostic functions may include:

• EV high-voltage battery pack diagnostics
• Battery system fault-code reading
• Battery data and live parameters
• Battery status and operating information
• Battery-related ECU/system diagnostics
• Battery diagnostic reporting
• Battery health information / State of Health (SOH), where supported by the vehicle
• Battery-pack diagnostics for supported BYD and CATL battery systems

The CRP919 EV can also create and save diagnostic reports, making it useful for workshops, vehicle inspections and documenting the condition of a vehicle.

Important: Available battery parameters, SOH information and battery tests depend on the vehicle manufacturer, model, battery system and software coverage. Not every EV will provide the same battery-health information.

🚗 Full-System EV Diagnostics

The CRP919 EV is not limited to basic OBD fault-code reading. It is capable of full-system and full-function diagnostics on supported vehicles.

Functions can include:

• Read and clear diagnostic trouble codes (DTCs)
• Full-system vehicle scan
• Live data / data stream
• Automatic VIN identification
• ECU information
• Active tests / bi-directional control
• Guided functions
• ECU coding
• System and component testing
• Diagnostic health reports
• Diagnostic recording and screenshots

This allows technicians to investigate faults across multiple vehicle systems rather than relying only on generic OBD-II diagnostics.

⚡ Designed for Modern EVs

The CRP919 EV supports CAN FD and DoIP, two communication technologies increasingly used in modern vehicles.

It supports diagnostic software for 84+ electric-vehicle brands/software applications, with coverage varying according to vehicle model, year and software version.

The scanner also supports dedicated EV diagnostic coverage for numerous manufacturers, including EV-specific software for brands such as Tesla, Renault, Volkswagen Group brands, Volvo/Polestar and many Chinese EV manufacturers, subject to current software coverage.

🔧 43+ Service & Maintenance Functions

The CRP919 EV provides a wide range of service, reset, adaptation and maintenance functions. Depending on the vehicle, functions can include:

• Oil Reset
• BMS / Battery Matching
• Brake Reset / EPB
• SAS Reset
• ABS Bleeding
• TPMS Reset
• Injector Coding
• Throttle Adaptation
• Gearbox / Gear Learning
• DPF Regeneration
• EGR Adaptation
• AFS Headlamp Reset
• Suspension Calibration
• Window Calibration
• Sunroof Initialization
• Start/Stop Reset
• AdBlue / SCR Reset
• Seat Calibration
• And many other vehicle-specific functions

Please note: Service functions are vehicle-dependent and not every function is available on every vehicle.

🔄 Bi-Directional / Active Tests

The CRP919 EV supports bi-directional control, allowing the technician to send commands to supported vehicle components and observe their response.

This can help with fault diagnosis by allowing technicians to test whether a component, circuit or control system responds correctly.

💻 ECU Coding

For supported vehicles, ECU coding can be used for functions such as module configuration, component replacement procedures, adaptations and certain vehicle customisation functions.

Availability depends on the vehicle manufacturer, model and ECU.

📊 Professional Diagnostic Reports

After scanning a vehicle, the CRP919 EV can generate a diagnostic health report showing the results of the vehicle scan.

Reports can be useful for:

• Customer vehicle inspections
• Pre-purchase vehicle checks
• Workshop records
• Repair documentation
• EV battery diagnostic records
• Demonstrating detected fault codes
• Providing customers with a record of the vehicle’s diagnostic condition

The scanner also supports saving diagnostic information, screenshots and recordings.

📱 Key Hardware Specifications

• Display: 7-inch touchscreen
• Resolution: 1024 × 600
• Operating System: Android 10
• CPU: 2.0 GHz
• RAM: 4 GB
• Storage: 64 GB
• Battery: 6000 mAh
• Wi-Fi: 2.4 GHz / 5 GHz
• Interfaces: OBD II / USB Type-C
• Operating temperature: 0°C to 40°C
• Storage temperature: -20°C to 70°C
• Weight: Less than 950 g

🌍 Multi-Language Support

The CRP919 EV supports multiple interface languages, including:

English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, Polish and Traditional Chinese.

🔄 2 Years Free Software Updates

The CRP919 EV includes 2 years of free software updates according to LAUNCH’s current product information.

After the free-update period, the scanner can continue to be used, while further software updates may require a paid subscription/update.

🛞 Optional Accessories

The CRP919 EV can also work with selected LAUNCH accessories, including:

• LAUNCH BST360 battery tester
• LAUNCH TSGUN / i-TPMS tyre-pressure diagnostic equipment

These accessories are optional and are not necessarily included with the standard CRP919 EV package.

Why Choose the LAUNCH CRP919 EV?

The CRP919 EV combines advanced vehicle diagnostics with dedicated electric-vehicle battery-pack diagnostics, making it a useful tool for workshops working with the growing number of EVs on the road.

From full-system diagnostics and ECU coding to bi-directional testing and EV battery diagnostics, it provides significantly more capability than a basic OBD-II code reader.

Key Features at a Glance

✓ EV & New Energy Vehicle Diagnostics
✓ EV High-Voltage Battery-Pack Diagnostics
✓ Battery Health Information / SOH on Supported Vehicles
✓ EV Battery Diagnostic Reports
✓ Full-System Diagnostics
✓ 43+ Service Functions
✓ Bi-Directional / Active Tests
✓ ECU Coding
✓ CAN FD & DoIP
✓ Automatic VIN Recognition
✓ Diagnostic Health Reports
✓ 84+ EV Diagnostic Software Applications
✓ BYD & CATL Battery Diagnostics
✓ 7″ Android Touchscreen
✓ 4GB RAM + 64GB Storage
✓ 6000mAh Battery
✓ 2 Years Free Software Updates

1 Year warranty and after warranty service available.
Price Inc. VAT and Postage (VAT Receipts Available)